Application

It is suitable for garden pruning, forest logging, chopping wood, bamboo harvesting, timber making, ice cutting, tree pruning, clearing land, preparing firewood or cleaning up, outdoor wood cutting, for home, garden, ranch, and farm use.

Specification

Material: Nylon, Mn Steel, Aluminum

Engine Type: Single Cylinder, Air-cooled, 2-Stroke

Ignition System: Self-reset Pull Start

Fuel Tank Capacity: 550ml/18.6Oz

Chain Fuel Tank Capacity: 140ml/4.73Oz

Bore: 45.2mm/1.78inch

Volume: 116dB

Power: 2.8kw

Speed: 10000rpm

Displacement: 60cc

Oil Mixture: 25:1(90# Gasoline: Oil)

Max. Cutting Diameter: 55cm/22in

Chain Length: 55cm/22inch

Gross Weight: 8kg/17.64lb

Notes

1. Before starting the gasoline chainsaw, please ensure that it fits well with the guide bar, and use a wrench to adjust the chain. When installing the guide bar, please note that the screw column on the side cover must be aligned with the guide bar hole before installation(The function of the screw column is to adjust the chain tightness.).

2. Please use gasoline 90# with special 2-cycle engine oil and never use pure gasoline. Gasoline and oil mixture ratio: 25:1. The oil output can be controlled to turn larger to the left and smaller to the right.

3. If the choke knob is not fully pushed back after pulling the starter handle up to 6 times, the engine preheating may be missed. Too much fuel will flow out and submerge the spark plug. Then you can't start the chainsaw. The damper is used to regulate air intake. When the engine is cold or not used for a long time, the damper needs to be pulled. If the engine is hot, it can be started directly. This is the same as the principle of starting a motorcycle! Close the damper, pull the start handle again 1-3 times to start it, and then you can use it normally.